I Can’t Carry It For You, Daniel D. Brown, Ph.D., 2020

“I Can’t Carry It For You…”
3D Wooden light-up “Lord of the Rings” intarsia art, roughly based on the scene when Sam carries Frodo into Mt. Doom (“but I CAN carry you!”).

I’m finally ready to call this piece done! It ended up taking me 2 months to complete, despite initially planning it to be simpler and quicker than my Han/Chewie/Millenium Falcon piece. Ha!
I always thought Samwise Gamgee was the real hero of the story and I decided a scene of him carrying Frodo into Mt. Doom might be a cool artwork with LEDs. My first design had much fewer layers, with the characters much larger. But I decided to add Barad-Dur, Shelob, and the black gate, which changed the scale dramatically (and made it almost 6” thick, and 24” tall). Obviously I’ve taken some liberties as they were much closer to the entrance when he carried Frodo (and Shelob was dead by then). Plus their scale isn’t exactly accurate. But they needed to be large enough to see.
Everything was cut by hand on scroll saw and hand carved for the characters.
I built this from crab apple, walnut, and cherry I milled up myself from reclaimed urban trees, as well as katalox (thanks @rapfohl), spalted hackberry (thanks @chipdwoodworks), reclaimed mahogany, red oak, poplar, canarywood, and ebony, with a maple frame. My wife @tamarynart did her pyrography magic to burn the “One ring to rule them all…” inscription into the frame. There are 4 LEDs running off three AA batteries, colored orange with acetate film. Shelob serves as the power button. The eye is a walnut pupil embedded in multiple layers of watercolored resin.
I’m pretty stoked to have this thing shining over our “lair” across from the Millenium Falcon!
Note: the build process was documented in many stories now highlighted on my Instagram profile.

View this post on Instagram

“I Can’t Carry It For You…” 3D Wooden light-up “Lord of the Rings” intarsia art, roughly based on the scene when Sam carries Frodo into Mt. Doom (“but I CAN carry you!”). … I’m finally ready to call this piece done! It ended up taking me 2 months to complete, despite initially planning it to be simpler and quicker than my Han/Chewie/Millenium Falcon piece. Ha! I always thought Samwise Gamgee was the real hero of the story and I decided a scene of him carrying Frodo into Mt. Doom might be a cool artwork with LEDs. My first design had much fewer layers, with the characters much larger. But I decided to add Barad-Dur, Shelob, and the black gate, which changed the scale dramatically (and made it almost 6” thick, and 24” tall). Obviously I’ve taken some liberties as they were much closer to the entrance when he carried Frodo (and Shelob was dead by then). Plus their scale isn’t exactly accurate. But they needed to be large enough to see. Everything was cut by hand on scroll saw and hand carved for the characters. I built this from crab apple, walnut, and cherry I milled up myself from reclaimed urban trees, as well as katalox (thanks @rapfohl), spalted hackberry (thanks @chipdwoodworks), reclaimed mahogany, red oak, poplar, canarywood, and ebony, with a maple frame. My wife @tamarynart did her pyrography magic to burn the “One ring to rule them all…” inscription into the frame. There are 4 LEDs running off three AA batteries, colored orange with acetate film. Shelob serves as the power button. The eye is a walnut pupil embedded in multiple layers of watercolored resin. I’m pretty stoked to have this thing shining over our “lair” across from the Millenium Falcon! Note: the build process was documented in many stories now highlighted on my profile. #lordoftherings “samwisegamgee #frodobaggins #gollum #scrollsawart #geekart #woodart #intarsia #oneringtorulethemall #pittsburghwoodworking #madeinpittsburgh #woodworking #handmade #scrollsaw #woodworking #woodworker #handmade #woodporn #maker #imadethis

A post shared by Laughing Mantis Studio (@laughingmantisstudio) on

View this post on Instagram

And here are a couple stills. … I haven’t posted on this LOTR piece entitled “I can’t carry it for you…” in a while (but tons of stories). I’m still working on it. When I designed this, I thought I was making it simpler and easier than my Star Wars project. It’s turned out only modestly so. I still have quite a bit to do, but the pieces are all cut, adjusted to depth, and finished with poly. I put resin in Mt Doom, got Sauron’s eye more or less how I envisioned (multiple resin layers with sanding and watercolor, then an acetate backing and a watercolored paper backing to hide the LED heat sink). It’s all wired up – the lights weren’t bright enough for my taste on 2xAAs, so I threw in some resistors to bump it to 3xAA (which is slightly above the voltage rating of these LEDs. Hopefully the resistors will protect them.). I still have to actually assemble everything with glue, attach Sam/Frodo, Shelob, and Sméagol. And figure out how I’m gonna frame/mount this beast. … #lotr #buticancarryyou #samwisegamgee #frodobaggins #smeagol #mountdoom #scrollsawart #woodart

A post shared by Laughing Mantis Studio (@laughingmantisstudio) on

View this post on Instagram

I haven’t posted on this LOTR piece entitled “I can’t carry it for you…” in a while (but tons of stories). I’m still working on it. When I designed this, I thought I was making it simpler and easier than my Star Wars project. It’s turned out only modestly so. I still have quite a bit to do, but the pieces are all cut, adjusted to depth, and finished with poly. I put resin in Mt Doom, got Sauron’s eye more or less how I envisioned (multiple resin layers with sanding and watercolor, then an acetate backing and a watercolored paper backing to hide the LED heat sink). It’s all wired up – the lights weren’t bright enough for my taste on 2xAAs, so I threw in some resistors to bump it to 3xAA (which is slightly above the voltage rating of these LEDs. Hopefully the resistors will protect them.). I still have to actually assemble everything with glue, attach Sam/Frodo, Shelob, and Sméagol. And figure out how I’m gonna frame/mount this beast. … #lotr #buticancarryyou #samwisegamgee #frodobaggins #smeagol #mountdoom #scrollsawart #woodart

A post shared by Laughing Mantis Studio (@laughingmantisstudio) on

https://www.instagram.com/stories/highlights/18070712896169820/